DM Illumination Agencies - Intellibus Home Automation and Building Management
Contact Details:
Tel:
Email:
+27 21 551 9360
dave@intellibus.co.za

Intellibus - Products



Vario Range


6 or 12 button configured Wall stations are available with either black or white backing cover plates, with a green LED indication light.All Intellibus wall stations are housed in the Legrand Arteor frames and cover plates in either their square or round modules. These units can be installed either vertically or horizontally depending on the client preference.

Wall Box Dimmers


All dimmers carry a 3-year “carry in” replacement warranty.  Goods are only guaranteed if they are stored, installed and operated under the conditions for which they were designed.  The goods must be returned to us, carriage paid, for inspection at our own premises for either repair or replacement.

Surface/Remote Bell Press or Potentiometer Dimmer


Operating voltage 230V – comes in 2Kw, 3Kw and 4Kw modules, please see below specs:

2KW – 2000 watt resistive, 1600VA inductive

3KW – 3000 watt resistive, 2400VA inductive

4KW – 4000 watt resistive, 3000VA inductive

Turn Dimmers


LED Turn dimmer - Turn dimmer, 2 module Legrand Arteor. 90 watt maximum and 6 watt minimum LED Load with switched potentiometer. Operating voltage 230V.  The dimmer has an adjustable low end trim so that the LED lamps do no flicker.


Turn Dimmer – Turn dimmer, 2 module Legrand Arteor. 600 watt resistive, 500VA inductive loads (Minimum load resistive is 40 watts, 50VA inductive) with a switched potentiometer. Operating voltage 230V.

Remote Bell Press LED 5 wire Dimmer


Remote electronic 5 wire Bell Press dimmer, 240 watt. (Minimum load 6 watt) Operating voltage 230V 

Remote Bell Press Dimmer


R2 Remote Bell Press Dimmer – Remote touch dimmer, specifically for low wattage loads such as dimmable LED or CFL lamps. 240 watt resistive , capacitive or inductive.(Minimum load resistive 18 watt). Operating voltage 230V.

 

R5 Remote Bell Press Dimmer – Remote touch dimmer, 600 watt resistive 500VA inductive. (Minimum load resistive 40 watt, inductive 50VA). Operating voltage 230V.


R6 Remote Bell Press Dimmer – Remote touch dimmer, 800 watt resistive 600VA inductive. (Minimum load resistive 60 watt, inductive 100VA). Operating voltage 230V.Surface/Remote bell press dimmers


R8 Remote Bell Press Dimmer – Remote touch dimmer, 1000 watt resistive 800VA inductive. (Minimum load resistive 60 watt, inductive 100VA). Operating voltage 230V.Surface/Remote bell press dimmers

Remote Bell Press Dimmer - 350 VA trailing edge dimmer for Electronic transformers and certain LED loads.

Accessories


Electronic transformer stabiliser - Electronic low voltage transformer stabilizer suitable for 4 electronic transformers.  Prevents flicker from occurring

 

Switching relay - 18 amp relay for boosting thermostat capacity for loads up to 18 amps

Panel & Panel Devices


YOU TAKE CHARGE ....COMPLETE FLEXIBILITY...

Intellibus uses a modular system enabling complete flexibility and allowing for easy expansion of your system with a full range of Panels, Dimmers, Switching modules and Power supply options.

IB PRO16 - 16 modules or 32-zone panel [ 900mm(h) x 600mm(w) x 200mm(d)]. Supplied complete with 63A TP isolator and 17 single pole MCBs to match module configuration.  All internal wiring is installed at the factory.  Panel is able to house up to 16 modules and any of our power supplies.  All terminals are clearly labeled making it simple for contractors to work on.

 

IB PRO8 - 8 modules or 16-zone panel [ 900mm(h) x 300mm(w) x 200mm(d)]. Supplied complete with 63A TP isolator and 9 single pole MCBs to match module configuration.  All internal wiring is installed at the factory.  Panel is able to house up to 8 modules and our IBA PSU16MQ  power supply.  All terminals are clearly labeled making it simple for contractors to work on.

 

Commander - Processor with embedded Web Server able to control up to 256 Devices and   up to 128 Wallstations with the ability to store up to 64 Timed events on a single Loop.

 

Master Commander - The Master Commander is able to combine multiple commanders for larger applications over TCP/IP.

IBC 6IN Ce


This 6 way contact input board as the capacity to receive 6 potential free contact closure inputs from devices such as security systems, garage doors, gates, intercom systems, etc.

Control modules


BID 22T         - 2kW 2 channel dimmer module

BID 22LED    - 2kW 2 channel LED phase control dimmer

BID 23            - 3kW 2 channel dimmer module

BIDS 206       - 6A 2 channel switching module with no min load

BIDS 210        - 10A 2 channel switching output module

BIDS 213        - 13A 2 channel switching output module

BIBDSI           - DSI 2 channel Fluorescent interface module

IntelliAmp


4 Stereo and video outputs with 8 inputs

Assembler


Intellibus has DIN mounting controls solution called the Assembler range.  The Assembler range is ideal for smaller or where it is necessary to mount into existing electrical distribution boards.  Assembler is the most economical in the Intellibus range. 

As one of our services, we do full board designs as well as contruction all in-house.  We also will provide assistance and training to the contractors to ensure ease of installation.


IBA BSE: – The assembler Base unit accepts up to 5 Assembler dimmer modules.  Physical dimensions - 9 DIN modules.

 

IBA DSI: – DSI to Intellibus dimmer. Controls up to 15 DSI Ballasts.


IBA 1-10V: – 1-10 volt dimmer. Suitable for dimming 1-10vfluorescent ballasts and 1-10v LED drivers. Maximum of 15 ballasts or 1A.

 

 IBA 2AD: – Leading Edge 400 watt dimmer.

 

IBA 4AD:  – Leading Edge 800 watt dimmer.

 

IBA 2LED: - 1 Channel 240VA LED dimmer card

 

BIBA PR10A: – Potential free 4 way relay board. Maximum 10A AC or 2A DC per channel.Physical dimension – 9 DIN modules.

 

BIBA PR10A8: – Potential free 8 way relay board. Maximum 10A AC or 2A DC per channel.Physical dimension – 9 DIN modules.

 

BIBA PR10AC: - Potential free relay specifically designed to control curtains, blinds or screens.  The device has an electric interlock preventing the motor from being sent in both directions simultaneously. Two outputs.  Dimensions – 9 DIN modules.

 

BIBA PR10A8C: - Potential free relay specifically designed to control curtains, blinds or screens.  The device has an electric interlock preventing the motor from being sent in both directions simultaneously. Four outputs.  Dimensions – 9 DIN modules.


IBA PSU16MQ: - Power Supply for up 32 devices and up to 16 wall stations.


IBA PSU 12v: - 12 Volt auxiliary Power Supply.


IBA APPLE TCP: - TCP/IP Intellibus 256 Interface web embedded server and Apple interface.


IB RGB3: - 3 Channel LED Driver

iWallsation


This app gives the user the ability to have total control of everything connected to their Intellibus system using their iPhone iPod touch or iPad. This can be done from within their homes via WIFI or remotely using access through a DSN gateway.  With these devices you will be able to create custom wall stations as well as monitor whether your devices are on or off.

Input Interface


6 way contact closure input board converts analogue contact closure to Intellibus digital input.  This allows simple interface between items like a N/O bell press or garage door opener or gate or alarm system.

Touch Screen


Standard 4 x 2 mounting.  Brushed aluminium housing.  Cool blue screen.  It has 8 buttons and a built in Time Clock which can store up to 32 timed and astronomical events (For example the user can set their external lights to switch with the sunset and sunrise in accordance with the seasons)

Vario Touch Range


6 or 12 touch button configured Wall stations are available with either black or white backing cover plates, with a green LED indication light. All Intellibus wall stations are housed in the Legrand Arteor frames and cover plates in either their square or round modules. These units can be installed either vertically or horizontally depending on the client preference.

Passives (Corner or Ceiling mounted)


The Passive IR detector links directly onto the buss and allows you to control the light levels of groups or zones, based on movement and ambient light intensity within an area.  It has a build-in timeout function that allows a second command to be sent to the selected group or zones.  This means that a room may have 2 different light levels based on the whether there is someone in the room or not.  The built-in timeout function is adjustable from 3 seconds to 3 hours.


Home | Profile | Projects | Location | Contact | Enquiries

© Copyright DM Illumination Agencies | All rights reserved 2012
Business Solutions From Internet Technology